Salt minerals10 – 20 kg bags
Minerals · Salt minerals
Dosage
- Pond preparation before stocking1 – 2 kg/1,000 m³
- During culture1 – 2 kg/1,000 m³
- Improving minerals at low salinity3 – 4 kg/1,000 m³
Adds minerals to pond water, balances minerals and helps shrimp adapt when conditions fluctuate — especially useful in low-salinity ponds.
- 150,000 mg
- Na from NaCl (min)
- 10,000 mg
- Ca from CaCO3 (min)
- 1 – 2 kg
- /1,000 m³, every 3 – 4 days
- 3 – 4 kg
- /1,000 m³ at low salinity
- Form
- Powder
- Pack
- 10 kg, 20 kg
- Standard
- 19:2019/TV
- Reg. no.
- 02001910
01 — Benefits
3 main benefits
- 01
Adds minerals to pond water, helping balance minerals and stabilise the water.
- 02
Helps keep mineral levels suitable so shrimp adapt better when conditions fluctuate.
- 03
Helps limit adverse signs linked to mineral shortage in the pond.
02 — Dosage
Dosage per the product label
Applied to the water. Based on pond volume (m³ = area × depth).- Pond preparation before stocking1 – 2 kg/1,000 m³
- During culture1 – 2 kg/1,000 m³Every 3 – 4 days
- Improving minerals at low salinity3 – 4 kg/1,000 m³
How to apply
- 1Dissolve in enough water
- 2Spread evenly over the whole pond surfaceRun all aerators and paddlewheels while applying.
- 3Best applied at nightBefore moulting.
To work out Ca, Mg and K for your pond's salinity, use the mineral calculator at thanvuong.vn/en/cong-cu/tinh-khoang.
Amount per application
Water volume4,800 m³
Choose the situation
You need4.8 – 9.6 kg≈ 0.5 – 1 bags of 10 kg · before stocking
Send your pond conditions to fine-tune the doseComposition · StorageComposition and storage
Composition
NaCl, CaCO3, carrier (zeolite).
Quality specification
Na (from NaCl) (min): 150,000 mg Ca (from CaCO3) (min): 10,000 mg moisture (max): 10% carrier (zeolite) q.s. 1 kg
Storage
Store in a dry, cool place away from direct sunlight. Keep out of reach of children.
Registration
- Company standard
- TCCS 19:2019/TV
- Reg. no.
- 02001910
- Form
- Powder
FAQFrequently asked questions
- What is MIX 500 used for?
- Salt minerals — essential minerals for moulting and firm, glossy shells
- How to use MIX 500?
- Dissolve in enough water and spread evenly over the pond surface with all aerators and paddlewheels running; best applied at night before moulting. Pond preparation before stocking: 1 – 2 kg/1,000 m³ of water. During the crop: 1 – 2 kg/1,000 m³, every 3 – 4 days. Improving minerals at low salinity: 3 – 4 kg/1,000 m³ of water.
- Main benefits of MIX 500?
- Adds minerals to pond water, helping balance minerals and stabilise the water. Helps keep mineral levels suitable so shrimp adapt better when conditions fluctuate. Helps limit adverse signs linked to mineral shortage in the pond.
- What packaging does MIX 500 come in?
- MIX 500 comes in 10 kg, 20 kg.
Product Reviews
No reviews yet. Be the first!
04 — Same product line
What pairs well with this product?
MIX 500 is often combined with products from the same line for the best results.
PRO SURSaturated fatty acids (butyric, caprylic) that help stabilize the shrimp gut microbiota and hepatopancreas for better digestion and absorption
SOILMAX NewBiological Solution for Environmental Management in Super-Intensive Aquaculture
MAX 4000Microbial specific for NO2 reduction
MAX 4000 (250 g foil pouch)Biological environmental treatment: microbes that break down organic sludge, helping reduce toxic NH₃, NO₂ and H₂S in the water and pond-bottom mud. 250 g foil pouch.
SHIELD PROBuilds a balanced pond microbiota: stable pH and algae, less liner slime; Bacillus + Pediococcus, with Bacillus enzymes breaking down organics
OZYMEEnzymes to cut algae, clean pond liner slimeLow-salinity pond, soft shells, hard moults?
Message us on Zalo or call the hotline for free advice from Thần Vương’s technical team — reply within 24h.