- During culture1 L/1,000 – 1,500 m³
- Toxic gas absorption, surfacing shrimp1 L/800 – 1,000 m³
Yucca schidigera extract with at least 10% saponin — absorbs toxic NH₃ fast, improves water quality and helps shrimp grow.
- ≥ 10%
- Saponin from Yucca schidigera
- 1 L
- /1,000 – 1,500 m³, every 4 days
- 1 L
- /800 – 1,000 m³ when shrimp surface
- 500 g · 1 kg
- bottles
- Form
- Liquid
- Packaging
- 500 g · 1 kg bottles
- TCCS
- 85:2018/TV
- Product code
- 02043001
2 main benefits
- 01
Rapidly absorbs toxic gas NH3. Improves water quality,
- 02
create favorable conditions for shrimp development.
Concentrated saponin for when toxic gas must come down fast
AQUA YUCCA has a high saponin content (at least 10%) — used routinely to keep toxic gas low, and at a higher dose when shrimp surface because of NH₃.
- 01
Fast NH₃ absorption
Quickly absorbs toxic NH₃ in pond water.
- 02
Better water quality
Creates good conditions for shrimp growth.
- 03
Shake before use
A concentrated liquid — shake the bottle well before diluting.
Dosage per the product label
Applied to the water. Based on pond volume (m³ = area × depth).- During culture1 L/1,000 – 1,500 m³Every 4 days
- Toxic gas absorption, surfacing shrimp1 L/800 – 1,000 m³
How to use
- 1Shake the product well before use
- 2Dilute in water and spread evenly over the pond with paddlewheels running
Adjust the dose to actual pond conditions, stocking density and shrimp health.
Close the bottle/can tightly after use if not finished.
Composition · StorageComposition and storage
Composition
Saponin (Yucca schidigera plant extract), Solvent (distilled water).
Quality specification
Saponin (Yucca schidigera plant extract) (min): 10% Solvent (distilled water) q.s. 1 liter
Storage
Store in a dry, cool place away from direct sunlight. Keep out of reach of children.
Registration
- Company standard
- TCCS 85:2018/TV
- Reg. no.
- 02043001
- Form
- Liquid
FAQFrequently asked questions
- What is AQUA YUCCA used for?
- Yucca emergency treatment for shrimp surfacing - immediate detoxification in the pond
- How to use AQUA YUCCA?
- During the culture period: 1 liter/1,000 – 1,500 m³ of water. Apply every 4 days. To absorb toxic gases, emergency response for shrimp gasping at the surface: 1 liter/800 – 1,000 m³ of water. Note: Shake the product well before use. Adjust the dosage appropriately based on the actual pond conditions, stocking density, and shrimp health. Close the bottle/jug cap tightly immediately after use if the product is not fully consumed.
- Main benefits of AQUA YUCCA?
- Rapidly absorbs toxic gas NH3. Improves water quality, create favorable conditions for shrimp development.
- What packaging does AQUA YUCCA come in?
- AQUA YUCCA comes in 500 g.
Product Reviews
No reviews yet. Be the first!
What pairs well with this product?
AQUA YUCCA is often combined with products from the same line for the best results.
PRO SURSaturated fatty acids (butyric, caprylic) that help stabilize the shrimp gut microbiota and hepatopancreas for better digestion and absorption
SOILMAX NewBiological Solution for Environmental Management in Super-Intensive Aquaculture
MAX 4000Microbial specific for NO2 reduction
MAX 4000 (250 g foil pouch)Biological environmental treatment: microbes that break down organic sludge, helping reduce toxic NH₃, NO₂ and H₂S in the water and pond-bottom mud. 250 g foil pouch.
SHIELD PROBuilds a balanced pond microbiota: stable pH and algae, less liner slime; Bacillus + Pediococcus, with Bacillus enzymes breaking down organics
OZYMEEnzymes to cut algae, clean pond liner slimeShrimp surfacing because of toxic gas?
Message us on Zalo or call the hotline for free advice from Thần Vương’s technical team — reply within 24h.