- During culture2 – 3 kg/1,000 m³
- Large daily swings in pH and alkalinity3 – 4 kg/1,000 m³
Sodium bicarbonate (NaHCO₃) at least 95% — raises alkalinity and keeps pH steady by strengthening the carbonate – bicarbonate buffer, helping shrimp keep osmotic balance and moult smoothly.
- 95%
- NaHCO₃ (min)
- 2 – 3 kg
- /1,000 m³, every 5 – 7 days
- 3 – 4 kg
- /1,000 m³ when pH and alkalinity swing hard
- 25 kg
- bag
- Form
- Powder
- Packaging
- 25 kg bag
- TCCS
- 106:2019/TV
- Reg. no.
- 02014376
3 main benefits
- 01
Raises alkalinity and keeps pond pH steady.
- 02
Holds pH steady by strengthening the carbonate and bicarbonate buffer.
- 03
Helps shrimp maintain osmotic balance and moult smoothly.
A buffer that holds pond pH and alkalinity
Alkalinity is the water's buffering capacity — when it is low, pH swings hard between morning and afternoon, shrimp get stressed and moult poorly. The bicarbonate in ALKAE feeds that buffer directly.
- 01
Higher alkalinity
NaHCO₃ dissolves into bicarbonate ions and raises the water's alkalinity.
- 02
Steady pH
Strengthens the carbonate – bicarbonate buffer and narrows daily pH swings.
- 03
Osmosis and moulting
Stable water helps shrimp keep osmotic balance and moult smoothly.
Dosage per the product label
Applied to the water. Dose per pond water volume.- During culture2 – 3 kg/1,000 m³Every 5 – 7 days
- Large daily swings in pH and alkalinity3 – 4 kg/1,000 m³
How to use
- 1Dilute in enough water and spread evenly over the whole pond surfaceRun aerators so the product spreads evenly.
- 2Best applied at 10 – 11 pm
Adjust the dose to actual pond conditions, stocking density and shrimp health.
Seal the bag right after use if not finished.
Composition · StorageComposition and storage
Composition
NaHCO3.
Quality specification
NaHCO3 (min): 95%
Storage
Store in a dry, cool place away from direct sunlight. Keep out of reach of children.
Registration
- Company standard
- TCCS 106:2019/TV
- Reg. no.
- 02014376
FAQFrequently asked questions
- What is ALKAE used for?
- Increase alkalinity, stabilize pH through the carbonate buffer system
- How to use ALKAE?
- Mix the product with sufficient water, broadcast evenly over the entire pond surface, turn on aeration devices for the product to distribute evenly throughout the pond, and it should be broadcast at 10 - 11 PM. During cultivation: 2 - 3 kg/1,000 m³. Periodically every 5 - 7 days. In cases where pH and alkalinity fluctuate too much during the day: Use 3 - 4 kg/1,000 m³ of water, which helps stabilize pH by improving the buffering system, maintaining osmoregulation, and the molting ability of shrimp. Note: Adjust the dosage accordingly depending on the actual pond conditions, stocking density, and shrimp health. Seal tightly, zip the bag immediately after use if the product is not entirely used.
- Main benefits of ALKAE?
- Raises alkalinity and keeps pond pH steady. Holds pH steady by strengthening the carbonate and bicarbonate buffer. Helps shrimp maintain osmotic balance and moult smoothly.
Product Reviews
No reviews yet. Be the first!
What pairs well with this product?
ALKAE is often combined with products from the same line for the best results.
LALSEA BIOREMAmmonia removal, biological organic treatment, effective at high salinity
NIAZYME GranuleMicrobial treatment for pond bottom, decomposes organics, stabilizes water quality
NUTRI RHODONutritional supplement (Yeast protein) for optimal shrimp growth and development
MAGIE MAXSupplies Magnesium, aiding in shrimp muscle and shell development.
CELL CALPHOS GOLDMineral premix — Ca + Fe + Cu chelate, promotes shell hardening, stimulates uniform molting
YANGBalances gut microbiota, stimulates natural defensepH swinging, alkalinity dropping?
Message us on Zalo or call the hotline for free advice from Thần Vương’s technical team — reply within 24h.