Working hours: Mon - Fri | 08:00 - 17:00HOTLINE: 0867 95 7568
MIX 400 (Hot Mineral)
Than Vuong Nutrition

MIX 400 (Hot Mineral)

Helps limit white muscle and bent bodyView directions for use

CONTACT OUR TEAM
Form
Powder
Pack
5 kg, 10 kg, 20 kg
Standard
109:2019/TV
Reg. no.
02002424
Full product information

Technical application information

Usage instructions
01 — Benefits

3 main benefits

  • 01

    Supplementing Ca and Mg helps enrich minerals in the culture water, contributing to stress reduction and improving shrimp survival rate.

  • 02

    Aids in the molting process and new shell formation, helping to ensure hard, firm, and uniform shells.

  • 03

    Helps improve soft shell condition and slow molting due to mineral deficiency.

02 — Dosage

Dosage per the product label

Read the complete label directions before use.
  • Directions 1Mix the product with an adequate amount of water, broadcast evenly over the entire pond surface, turn on all aeration equipment and paddlewheels when using the product. Best used at night before shrimp molting. Dosage for high-density nursery ponds: 1 day before stocking shrimp: 5 kg/100 m³ of water. After stocking shrimp: 1 – 2 kg/100 m³ of water/day/500,000 post-larvae. Grow-out ponds: Pond preparation before stocking: 2 kg/1,000 m³ of water. During cultivation: 1 – 2 kg/1,000 m³ of water. When shrimp show signs of soft shell or poor shell hardening: 2 – 3 kg/1,000 m³ of water. Should be used periodically every 3 – 5 days to ensure adequate mineral supply for farmed shrimp. Note: Adjust the dosage up or down as appropriate, depending on the actual pond conditions, stocking density, and shrimp health. Seal tightly and zip the bag immediately after use if the product is not fully consumed.
Composition · StorageComposition and storage

Composition

CaCO3, MgSO4.

Quality specification

Ca (from CaCO3) (min): 100,000 mg Mg (from MgSO4) (min): 10,000 mg

Storage

Store in a dry, cool place away from direct sunlight. Keep out of reach of children.

Registration

Company standard
TCCS 109:2019/TV
Reg. no.
02002424
Form
Powder
FAQFrequently asked questions
What is MIX 400 (Hot Mineral) used for?
Helps limit white muscle and bent body
How to use MIX 400 (Hot Mineral)?
Mix the product with an adequate amount of water, broadcast evenly over the entire pond surface, turn on all aeration equipment and paddlewheels when using the product. Best used at night before shrimp molting. Dosage for high-density nursery ponds: 1 day before stocking shrimp: 5 kg/100 m³ of water. After stocking shrimp: 1 – 2 kg/100 m³ of water/day/500,000 post-larvae. Grow-out ponds: Pond preparation before stocking: 2 kg/1,000 m³ of water. During cultivation: 1 – 2 kg/1,000 m³ of water. When shrimp show signs of soft shell or poor shell hardening: 2 – 3 kg/1,000 m³ of water. Should be used periodically every 3 – 5 days to ensure adequate mineral supply for farmed shrimp. Note: Adjust the dosage up or down as appropriate, depending on the actual pond conditions, stocking density, and shrimp health. Seal tightly and zip the bag immediately after use if the product is not fully consumed.
Main benefits of MIX 400 (Hot Mineral)?
Supplementing Ca and Mg helps enrich minerals in the culture water, contributing to stress reduction and improving shrimp survival rate. Aids in the molting process and new shell formation, helping to ensure hard, firm, and uniform shells. Helps improve soft shell condition and slow molting due to mineral deficiency.
What packaging does MIX 400 (Hot Mineral) come in?
MIX 400 (Hot Mineral) comes in 5 kg, 10 kg, 20 kg.
03 — Reviews

Product Reviews

No reviews yet. Be the first!

04 — Same product line

What pairs well with this product?

MIX 400 (Hot Mineral) is often combined with products from the same line for the best results.

Message us on Zalo or call the hotline for free advice from Than Vuong’s technical team — reply within 24h.

Ask Than Vuong

Aquaculture technical assistant

Hello there 👋

Describe your pond issue or pick a question below.